Canon L100 Service Manual page 100

4
Disassembly/Assembly > Controller System > Removing the Paper Leading Edge Sensor > Procedure
2) Disconnect the terminal [1], and free the Transfer High Voltage Harness [2] from the
Harness Guide [A].
3) Remove the Harness Retaining Spring [3] from the 2 hooks [B].
[1]
[2]
[A]
4) Disconnect the 4 connectors [1].
x4
4 Disassembly/Assembly > Controller System > Removing the Paper Leading Edge Sensor > Procedure
[B]
[B]
[3]
F-4-81
[1]
[1]
F-4-82
5) Free the harness [1] from the Harness Guide [A], and remove the Paper Leading Edge
Sensor [2].
• 2 Claws [3]
[2]
x2
[3]
NOTE:
The picture below shows how to route the harness.
4-46
[1] [A]
[3]
F-4-83
F-4-84
4-46