4
Disassembly/Assembly > Controller System > Removing the Drive Belt > Procedure
3) Remove the Drive Cover [1].
• 4 Screws [2]
CAUTION:
Be sure to slowly remove the Drive Cover [1] directly upward so as not to shift the
phase of the gears when disassembling.
x4
[2]
4) Remove the Fixing Transmission Gear [1] and the Cartridge Transmission Gear [2].
[1]
[2]
4
Disassembly/Assembly > Controller System > Removing the Drive Belt > Procedure
5) Remove the Drive Belt [1].
[2]
CAUTION:
Follow the steps below to install the Drive Unit when assembling.
[1]
F-4-48
F-4-49
[1]
[1]
[5]
[10]
[7]
[2]
[6]
[8]
[1]
Primary Deceleration Pulley
[6]
[2]
Timing Belt
[7]
[3]
Fixing Ratchet Gear 1
[8]
[4]
Fixing Ratchet Gear 2
[9]
[5]
Fixing Transmission Gear
[10]
4-35
F-4-50
[9]
[4]
[3]
F-4-51
Cartridge Transmission Gear
Coupling Gear
Feed Deceleration Gear
Compression Spring
Compression Spring
T-4-28
4-35