Canon L100 Service Manual page 111

4
Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit (L100/L170/L174/L250/L150 CHN/L150 KOR/L154) > Procedure
3) Free the Document Feed Motor Harness [1] from the ADF Harness Guide [A].
4) Free the harness [2] of the ADF Unit from the Harness Guide [B].
[B] [2] [A] [1]
5) Open the ADF Upper Unit, and remove the 2 shafts [1] and the arm [2].
[1]
4 Disassembly/Assembly > Original Exposure System > Removing the ADF Upper Unit (L100/L170/L174/L250/L150 CHN/L150 KOR/L154) > Procedure
F-4-111
[2]
[1]
F-4-112
6) Remove the ADF Upper Unit [2] while freeing the Flat Cable [1] from the Harness Guide [A].
NOTE:
Be careful not to damage the Operation Panel Unit by placing paper where the ADF
Upper Unit is to be placed.
[A]
[2]
[1]
NOTE:
When replacing the ADF Upper Unit, execute steps 7 to 10.
4-57
[1]
[2]
4-57