Pppoe Connection - WatchNet RTS series Installation And User Manual

• Subnet mask
• Gateway
• Service port: Default port is 4000. (System server port 4001 is reserved for
network UDP use.)
• HTTP port: Default value is 80
• Protocol: Select proper protocol from the dropdown list.
• Max connections: Amount of connections allowed, up to 10.
• Properties: There are three options: FTP/NTP/Alarm center. Select one of
the three and then click properties button to go to setup interface.
• Authorization: Click authorization button please highlight icon
IP authentication function. When this function is enabled, only IP in the list
can login this DVR. See
After completing the setup select the save button, to go back to the previous
menu.

5.3.5.1 PPPoE Connection

Enable PPPoE function and then input "PPPoE name" and "PPPoE
password" that was provided by the ISP (Internet Service Provider). Select
Figure 5-7.
449H
Figure 5-6
Figure 5-7
to enable
47