Motion Detect; Go To Motion Detect Menu - WatchNet RTS series Installation And User Manual

Advanced to HDD management, set one or more disk(s) as redundant.
Select from the dropdown list. See
overwrites old files once the hard disk is full. Please note only read/write
disk or read-only disk can backup file and support file search function, so
at least one read-write disk should be set otherwise video will not be
recorded.
Note:
About redundancy setup please note:
• If the current channel is not recording, the current setup gets activated when
the channel begin recording the next time.
• If the current channel is recording now, the current setup will get activated right
away, the current file will be packed and form a file, then system begins
recording as it have just been set.
After it's setup correctly then click save button, the system will go back to the
previous menu.
Playback or search in the redundant disk.
There are two ways to playback or search in the redundant disk.
• Set redundant disk(s) as read-only disk or read-write disk (Main menu-
>Advanced->HDD management). See
get setup activated. Now search or playback file in redundant disk.
• Remove the disk and play it in another PC.

Motion Detect

4.5

4.5.1 Go to Motion Detect Menu

In the main menu, from Setting to Detect, see motion detect interface. See
Figure 4-14.
4.5.2 Motion Detect
Detection menu is shown as below. See Figure 4-14.
• Channel: select the channel to implement motion detection.
• Type: in the dropdown list, select motion detection item.
• Record channel: select the channel to activate recording function once
alarm occurred. Please make sure to set MD record in encode interface(Main
Menu->Setting->Schedule) and schedule record in manual record
interface(Main Menu->Advanced->Manual Record)
• Enable tour: to activate tour between different cameras.
• Latch: when motion detection complete, system auto delays detecting for a
specified time. The value ranges from 10-300(Unit: second)
Figure 4-13. The system auto
393H
Figure 4-13
Figure 4-13.System needs to reboot to
394H
37