Rs232 Operation; Network Connection; Keyboard - WatchNet RTS series Installation And User Manual

9 RS232 Operation

Network Connection

9.1
Before serial port operation, please connect matrix with the DVR through RS232.
Then set DVR serial port protocol to the corresponding matrix protocol.
Note: Please contact the local retailer to confirm if the DVR supports matrix
protocol.

Keyboard

9.2
Control keyboard is very convenient for multi-DVR control, menu options and
PTZ control. Select "Keyboard Control" from system Setting -> RS232 ->
Function. Then set the concerning attributes such as the protocols. Connect the
DVR RS232 port to shifter 25-pin RS232 port and then set the proper control
addresses for all connected DVRs. Now input DVR control address and use
keyboard keys to set menu or control a PTZ. See
Note: The keyboard works only when ACT light is on.
Figure 9-1.
575H
Figure 9-1
85