Record Control - WatchNet RTS series Installation And User Manual

7.6.3.2

Record Control

Click "record control" button the interface is shown as below. See
7-14. Select the recording mode for each channel. Select the Alarm output
channel. Alarm output channel can not support large overload. (Use less
than 1A). Too heavy current may result in relay damage. Please use
contactor if necessary.
7.6.3.3 Record Control
Please select the HDD first and then the items on the right become valid.
Select the option that is needed and then click HDD control. The DVR
begins restarting.
Figure 7-13
Figure 7-14
Figure
562H
79