Overview And Controls; Front Panel - WatchNet RTS series Installation And User Manual

2 OVERVIEW AND CONTROLS

This section provides information about front and rear panel. When installing the
DVR for the first time, please refer to this part first.

Front Panel

2.1
This DVR series has two different front panels. Refer to Figure 2-1 and Figure 2-2
for both of these front panels.
S/N Name
1 Power Button
2 Power Indication Light
Remote Control
3
Signal Receiver
Enter
4
5 Cancel
Jog and Shuttle
6
(Inner and Outer Ring)
7 Switch View Mode
8 Recording Light
Figure 2-1
Icon Function
POWER Power button, press and hold for three seconds to shut down the DVR
LED Power indication light
IR Is used to receive signals from the remote control
Confirm operation
ENTER
Enter Cursor Selection
Cancel cursor selection
EXIT
During Playback, restore to real-time monitor
In real-time monitor mode it works as the left / right direction keys.
In playback mode, turn clockwise to go forward, and counter-clockwise to go
backwards
Acts similar to up/down direction key in menus
Knob
In playback mode, turn inner dial to perform frame by frame playback
Turning the outer ring clockwise moves right, counter-clockwise moves
left.
Turning the Inner dial clockwise moves down, counter-clockwise moves up.
View Switch between one, or multiple window display modes
LED
If the LED is Green, it means the recording is on.
1-16
13