Examples - WatchNet RTS series Installation And User Manual

Figure 5-278
A. Single Tour
Please enable tour function. Then set interval time and select
corresponding cameras. Select "ALL" to tour between all channels.
B. Alarm
Select the "Alarm In" channel number from the dropdown list. If there is an
alarm signal from the channel selected, the matrix output will go to tour as
was set in the "Alarm" setting (Main Menu->Setting->Alarm). See Figure
474H
5-28. Alarm tour has higher priority than single tour during this period,
single tour will stop. After alarm activation tour, the matrix output will
continue single tour.
Figure 5-28

5.5.7.7 Examples

A. Example one
In Figure 5-290, matrix outputs"1", "2", "3" tour between all cameras of
475H
the DVR. Matrix output 4 tours between "CAM1, CAM6 and CAM7" of the
DVR. The interval is five seconds each.
57