Rear Panel Connection; 37-Pin Cable Introduction; Matrix Setup; Video Matrix Interface And Application - WatchNet RTS series Installation And User Manual

between the cameras. So the matrix outputs can be used, for front TV's, to
tour and display the cameras.

5.5.7.3 Rear Panel Connection

The rear panel is shown as below. See

5.5.7.4 37-pin cable introduction

There are three colors cable. See
Note: RTSL 16ch video out, 4 matrixes, no audio in
RTSLH 16ch video out, 1 Matrix, 4 audio in.
Black: for loop outputs, there are 16-ch loop outputs
Blue: for matrix outputs, there are 4-ch matrix outputs
White: for bi-direction talk, one is for audio in and the other is for audio
out.

5.5.7.5 Matrix setup

5.5.7.5.1 Enter the Menu of Video Matrix
In the menu, from "Advanced" to "Video Matrix". See

5.5.7.6 Video Matrix Interface and Application

The video matrix interface is shown as in
support 4-channel matrix outputs and RTSLH series support 1 channel
matrix output. All the operation below is based on RTSL series DVR.
56
Figure 5-244.
469H
Figure 5-244
Figure 5-255.
470H
Figure 5-255
Figure 5-266
Figure 5-278. Now RTSL series
473H
Figure 5-266.
471H