Ptz Setup - WatchNet RTS series Installation And User Manual

• Connect power adapter to the dome.

4.8.2 PTZ Setup

Note: The camera video should be in the current screen. Before setup,
please check the following connections are correct:
• PTZ and decoder connection is correct. Decoder address is correctly setup.
• Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password. In the main menu, click
setting, and then click Pan/Tilt Control button. The interface is shown as in
Figure 4-23. Set the following items:
410H
• Channel: Select the current camera channel.
• Protocol: Select corresponding PTZ protocol (such as DH-SD1)
• Address: Default address is 1.
• Baud rate: Select corresponding baud rate. Default value is 9600.
• Data bits: Select corresponding data bits. Default value is 8.
• Stop bits: Select corresponding stop bits. Default value is 1.
• Parity: There are three options: Odd/even/none. Default setup is none.
Figure 4-23
43