El System - WatchNet RTS series Installation And User Manual

5. Screw the bracket back into the internal unit.
7. Connect the HDD with the SATA/IDE port, via the
communications cable
9. Replace the back cover, and re-screw firmly

3.2.3.2 EL System

1. Remove the upper cover of the DVR by removing
4 screws located at the back
3. Screw the HDD into the bracket
5. Connect the IDE cable to the IDE port
After HDD installation, please check
connection of data ribbon and power
cord.
6. Loosen the power cords for the HDD
8. Connect the power cord for the HDD.
10. Connect any USB devices (Mouse, portable
hard drive, or CD-RW) to the USB port directly.
2. Set the IDE jumper on the HDD to "Master"
4. Connect the IDE and Power to the HDD
.
6. Return the back cover and re-screw
21