Alarm Output; Manual Record; Account - WatchNet RTS series Installation And User Manual

5.5.2 Alarm Output

Setting up proper alarm output can be found here. Please highlight icon
select the corresponding alarm output. After completing setup select the OK
button, this will go to the previous menu. See Figure 5-20.

5.5.3 Manual Record

Please refer to chapter 4.2.2 Manual Record.

5.5.4 Account

User accounts can be managed here. See
• Add new user
• Modify user
• Add group
• Modify group
• Modify password.
For account management please note:
• System account adopts two-levels of management: group and user. No
limit to group or user amount.
• For group or user management, there are two levels: admin and user.
• The user name and group name can consist of eight bytes. One name can
only be used once. There are three default users: admin/user and hidden user
"default".
• Hidden user "default" is for system interior use only and cannot be deleted.
When there is no login user, hidden user "default" automatically login. Setting
some rights such as monitor for this user so that viewing some channels is
possible without login.
• One user should belong to one group. User right cannot exceed group
right.
• About reusable function: this function allows multiple users use the same
account to login.
54
Figure 5-19
Figure 5-20
Figure 5-211:
466H
to