Preset Setup; Activate Preset; Auto Tour Setup - WatchNet RTS series Installation And User Manual

In Figure 6-1, click page switch button, see the interface in Figure 6-4.
Activating the following functions can be found here:
• Preset
• Tour
• Pattern
• Aux On
• Aux Off
• Auto Scan
• Auto Pan
• Light On

6.2.1 Preset Setup

Note: The following setup is usually operated by the menus in Figure 6-1,
Figure 6-3 and Figure 6-4. In Figure 6-1, use the eight direction arrows to
493H 494H
adjust camera to the proper position. In
and input the preset number. The interface is shown in
preset can be added to one tour.

6.2.2 Activate Preset

In Figure 6-4 input the preset number in the "No." blank, and select the
498H
"Preset" button.

6.2.3 Auto Tour Setup

In Figure 6-3, click "Auto Tour" button. The interface is shown as in
499H
6-6. Input preset number and then add this preset to one patrol.
Figure 6-3
Figure 6-4
Figure 6-3, select the "Preset" button
496H
Figure 6-5
Figure 6-5. Now the
497H
Figure
500H
63