Activate Auto Scan; Dome Menu Control - WatchNet RTS series Installation And User Manual

6.2.8 Activate Auto Scan

In Figure 6-4, click "Auto Scan" button, the system begins auto scan.
511H
Correspondingly, the "Auto Scan" button will change to a "Stop" button. Select
the "Stop" button to terminate the scan operation.

Dome Menu Control

6.3
In Figure 6-4, select the "Page Switch" button, the interface is shown as below.
512H
See Figure 6-9 Select "menu" to enter the dome menu. The direction arrows
513H
here are to control the dome menu. Select the "Page Switch" button, the system
will go back to Figure 6-1.
Figure 6-9
65