Schedule Menu; Basic Operation; Quick Setup; Redundancy - WatchNet RTS series Installation And User Manual

4.4.1 Schedule Menu

In the main menu, go to DVR Setting, then go to Schedule menu. See
Figure 4-12. There are three record types: R-Regular, MD-Motion detection,
A- Alarm. In some series, system also supports C-Card)

4.4.2 Basic Operation

There are totally six periods. See
• Channel: Please select the channel number first. Then select "all" to set for
the whole channels.
• Day: There are eight options: Ranging from Saturday to Sunday and "all".
• Redundancy: System supports redundancy backup function. Highlight
Redundancy button to activate this function. Please note, before enable this
function, please set at least one HDD as redundant. Refer to the manual for
detailed information.
• Prerecord: System supports prerecord function. The previous one to three
seconds video before alarm occurs can be included in recorded video.
• Record types: There are three types: regular, motion detection (MD) and
Alarm.
Please highlight icon
the save button, the system will go back to the previous menu. At the
bottom of the menu, there is a color bar for reference. Green stands for
regular recording, yellow stands for motion detection and red stands for
alarm recording.

4.4.1.1 Quick Setup

This function allows copying one channel setup to another. After setting
in channel 1, click the copy button and turn to channel 2 and then click
paste button. After finishing the setting for one channel, change to
another channel or finish all setup by clicking the Save button to save all
the settings.

4.4.1.2 Redundancy

Redundancy function allows the saving of record file in several disks.
These files are created, packaged and closed simultaneously. When
there is file damage occurred in one disk, there is a duplicate one stored
on the other disk. Use this function to maintain data reliability and safety.
In the main menu, from Setting to Schedule, highlight redundancy button
to enable this function. See
36
Figure 4-12
Figure 4-12.
391H
to select the corresponding function. Then click
Figure 4-12. In the main menu, from
392H