Schedule; Com Port; Network - WatchNet RTS series Installation And User Manual

• Frame rate: (NTSC) 1 f/s, 2 f/s, 4 f/s, 7f/s, 15f/s, 20f/s, 30f/s (PAL) 1 f/s,
2f/s, 3f/s, 6f/s,12f/s,25f/s. (NTSC Default: 30f/s) (PAL Default: 25f/s)
• Enable audio: Turn audio recording on or off.
• Cover area (Privacy mask): Set a window blanking section. Drag the mouse
to set proper section size.
• Time display: Used to display the time in recorded videos.
• Channel display: Used to display the channel number in recorded videos.
Please highlight icon

5.3.3 Schedule

Please refer to chapter 4.4 Schedule.

5.3.4 Com Port

RS232 interface is shown as below. Here are five items. See Figure 5-5.
• Function: There are various devices that can be selected.
• Baud Rate: Select proper baud rate.
• Data Bits: Select proper data bit.
• Stop Bits: There are three values: 1/1.5/2.
• Parity: There are three choices: None/Odd/Even.
After setup is complete select the save button to go back to the previous
menu.

5.3.5 Network

Input network information. See
• IP address
46
to select the corresponding function.
Figure 5-4
Figure 5-5
Figure 5-6.
448H