Enable/Disable Record; Enable All Channel Recording; Stop All Channel Recording - WatchNet RTS series Installation And User Manual

4.2.2.3 Enable/disable record

Please check current channel status:
status, means it is in recording status. Use the mouse or direction keys
to highlight channel number. See Figure 4-6.

4.2.2.4 Enable all channel recording

Highlight All for Manual, to enable all channel recording.
Please highlight "ALL" after "Schedule". See Figure 4-7. When the system
is in schedule recording, all channels will records as previously set (Main
menu->Setting->Schedule). The corresponding indication light in front
panel will turn on.
• All Channel Manual Record
Please highlight "ALL" after "Manual." See Figure 4-8. When system is in
manual recording, any scheduled settings that are set will be overridden
((Main menu->Setting->Schedule)). See the indicator lights in front panel
turns on once the system begins manual recording mode.

4.2.2.5 Stop all channel recording

Please highlight "ALL" after "Stop". See
channel recording no matter what mode it was set in the menu (Main
menu->Setting->Schedule)
32
means it is not in recording
Figure 4-6
Figure 4-7
Figure 4-8
Figure 4-9. System stops all
385H