Auto Scan; Pattern; Preset; Auto Tour - WatchNet RTS series Installation And User Manual

Figure 7-5

7.3.1.1 Auto Scan

In Figure 7-5 move the camera to the desired left limit location and then click
left limit button. Then move the camera again to the desired right limit and
then click right limit button to set the limits.

7.3.1.2 Pattern

In Figure 7-5 input pattern value and then click start record button to begin
PTZ movement. Please go back to Figure 7-3 to implement camera
operation. Then click stop record button to set the pattern.

7.3.1.3 Preset

In Figure 7-5 move the camera to the desired location and then input preset
value. Click add button to save the preset.

7.3.1.4 Auto tour

In Figure 7-5 input auto tour value and preset value. Click add button, to add
one preset in the tour. Repeat the above procedures to add more presets in
one tour.

7.3.1.5 Assistant

Select the assistant item from the dropdown list. See Figure 7-5.

Alarm Setting

7.4
Click Alarm to set local alarm settings and set local alarm audio file.
70