Ptz Control - WatchNet RTS series Installation And User Manual

- Change Show Mode: resize or switch to full screen mode
- Local Record: When clicking local record button, the system
begins recording and this button becomes highlighted.
- Capture Picture: take a picture and save to remote computer
- Close Window: disconnect to the current connected camera

7.3.1 PTZ Control

Please click the corresponding direction arrow to adjust zoom, focus and iris.
See Figure 7-3.
523H
Note: Before operating this function, please make the PTZ protocol are set
properly. (Main menu->Setting->Pan-tilt Zoom).
Set the speed of the PTZ 1-8. 1 is
the slowest and 8 is the fastest.
Click to open PTZ options
Note: This will only work while viewing using Real-Time Monitoring mode.
Clicking the arrow down button in
below.
In Figure 7-4, click the "PTZ SET" button to see the following dialogue box
526H
below. See Figure 7-5.
527H
Figure 7-3
Figure 7-3 will show the interface shown
524H
Figure 7-4
AVT is 3D positioning button.
Around AVT are eight PTZ
directions keys.
+ key: zoom out. - key: zoom in.
Adjust the focus
- key: close. + key: open.
69