Indicator Lights Cluster; Speedometer - BOMBARDIER 650 Operator's Manual

7) Indicator Lights
Cluster
Traxter 5 SPEED
NOTE:
When first turning switch to
ON (either position), all indicator lights
will turn on for a brief moment. This
validates their operation. Thereafter,
only the lights that are activated will
remain on.
NOTE:
Temperature light stay on un-
til the engine runs.
If all lights flash, it indicates a particu-
lar malfunction of the transmission or
the electrical system. See an autho-
rized Bombardier ATV dealer as soon
as possible.
Gear Position Display
Located on left side of cluster. It lights
up to indicate the gear position when-
ever the ignition switch is turned
on when the transmission lever is
NOT in PARK or in NEUTRAL position
(whether or not engine is running).
1
V01A65Y
1. Gear position display
If all lights flash while shifting gear,
it indicates the shifting is not com-
pleted yet. Simply wait until the shift-
ing completes or retry the shift with
the gear shift button.
______________________
78
If all lights flash continuously, it in-
dicates a damaged sensor (gearbox).
Although the vehicle can still be op-
erated in this condition, downshifting
may increase engine "braking". Drive
slowly. See an authorized Bombardier
ATV dealer as soon as possible.

8) Speedometer

All Models
These vehicles are equipped with an
electronic speedometer. It indicates
the speed of the vehicle either in MPH
and km/h.
The speedometer is located at the
middle of cluster and it is backlit when
the ignition switch is turned ON (ei-
ther position).
3
V01A66Y
TYPICAL
1. Speedometer
2. Display (Odometer/trip meter/hourmeter)
3. Display selection button
4. Indicator lamps
Change from One Unit to
the Other
The speedometer is factory preset in
miles but it is possible to change is
reading to kilometer.
NOTE:
The unit modification is ap-
plied to the speedometer, odometer
and trip meter.
4
1
2