Indicator Lamps; Ignition Switch - BOMBARDIER rally 200 Operator's Manual

7) Indicator Lamps

High Intensity (Blue)
When the indicator light is ON, it indicates
high intensity is selected on the headlamps.
Engine Temperature/Oil Pressure
Lamp (red)
This light turns on when the ignition switch is
turned ON and remains on until the engine is
running.
When this indicator light is ON, it indicates the
engine is overheating or a low oil pressure
condition of the engine.
If engine overheats, refer to ENGINE OVER-
HEAT in SPECIAL PROCEDURES.
CAUTION: If the light does not turn off right
after engine starting, stop the engine. See an
authorized Bombardier ATV dealer. Do not
use the vehicle until repaired.
Reverse Lamp (red)
When lit, it indicates the transmission is in re-
verse position.
68
Neutral Lamp (green)
When lit, it indicates the transmission is in
neutral position.
Position Lamp (Green)
When lit, it indicates the position lamps are
turned on.
Direction Indicator (Green)
When the indicator light blink, it indicates
the direction indicators, left or right, are in
operation.

8) Ignition Switch

Located in the middle of cluster.
Key-operated, 3-position switch: OFF, ON
without lights and ON with lights.
TYPICAL
1. Ignition switch
Insert key in switch and turn to the desired
position. To remove key, turn key to OFF then
pull it out.
The ON with lights position, turns on all lights
with either the engine running or not. Remem-
ber that having the lights on without the en-
gine running discharges the battery. Always
turn ignition to OFF after engine has been
stopped.
NOTE: While engine can be stopped by turn-
ing ignition key OFF, we recommend the en-
gine be stopped by pushing the engine stop
switch.