Front/Rear Brake Pedal; Footpeg; Tool Kit - BOMBARDIER DS 250 Operator's Manual

vmo2006-014-013_a
1. Align the pointer toward the desired position
2. ON position
3. OFF position
4. RES position
OFF
Stops fuel supply to carburetor.
CAUTION: Turn valve to OFF posi-
tion when ATV is not being operat-
ed or when transporting.
ON
Allows fuel to flow to carburetor. This
is the normal position for operation of
the vehicle.
RES (RESERVE)
When fuel is exhausted in the fuel tank
when in the ON position, an emergen-
cy supply of fuel is available by turn-
ing the tab to RES. The reserve con-
tains approximately 10% of the fuel
tank capacity. Use only this position
when the ON supply is empty.
When down to the reserve, refuel as
soon as possible. Ensure to turn the
valve back to the ON position after re-
fuelling.
CAUTION: Improper opening of fu-
el valve will restrict the flow of fu-
el. Make sure valve is fully opened
while running.
______________________
70

11) Front/Rear Brake Pedal

Located in front of the right footpeg.
When pressed down, both front and
rear brakes are applied. When re-
leased, it should return to its original
position. Braking effect is proportion-
al to the force applied on the pedal
and to the type and condition of the
terrain.
vmo2006-014-014_a
1. Front/rear brake pedal

12) Footpeg

Use this area to maintain your feet sta-
ble.
vmo2006-014-014_b
1. Footpeg

13) Tool Kit

The tool kit is located in the service
compartment underneath the seat.