20) Seat Latch
Located underneath rear end of seat.
It allows the removal of seat to give
access to engine compartment.
V01L0AY
1. Seat
2. Seat latch
Seat Removal
Pull latch upward while gently lifting
rear of seat. Continue lifting movement
until you can release the front retaining
devices then completely remove seat.
Seat Installation
Place seat to allow the insertion of the
U-shaped bracket over the rollers. Gen-
tly slide the brackets over rollers then
lower seat. When seat rests in its posi-
tion, firmly push seat down to latch.
52
2
1
V01L0BY
1. U-shaped bracket
2. Rollers
WARNING
Periodically verify the seat lock pin
and tighten if needed. Make sure
seat is securely latched before
riding.
21) Front/Rear Cargo
Racks
Located on top of chassis at front and
rear. Convenient racks to carry gear.
WARNING
Ensure to properly secure materi-
al to rack. Do not overload. En-
sure load does not interfere with
visibility and/or steering. Do not
carry passenger(s).
Refer to SPECIFICATIONS for carrying
loads and cargo weight distribution
recommendations.
22) Air Duct
Located on rear fenders. They force
the flow of air to cool radiator.
CAUTION: Do not place anything
over air intake ducts.
2 1