Installing A Remote Customer Display - NCR RealPOS 70XRT User Manual

6-4 Chapter 6: Installing Optional Remote Peripherals

Installing a Remote Customer Display

The Standard Remote Mount (5964-K031) is used to mount the following NCR displays.
•
•
•
•
The displays are installed on the mount in a similar fashion. Only the 5964 is shown. See the
following sections for cable connections to the host terminal.
1. Install the mount onto the back of the Operator Display (4 screws).
NCR 5964 15-Inch Touch Monitor
NCR 5942 12.1-Inch Monitor
NCR 5942 15-Inch Monitor
NCR 5965 15-Inch Touch Monitor
21151b
26473