4. Enable Intel AMT Support. Press
option. Press [Enter].
Main
Advanced
Configure Intel AMT
.
.
► Intel AMT Support
5. Press
and
F10
[Enter]
6. During re-boot watch for the following message:
Press <CTRL-P> to enter Intel(R)ME Setup
This message occurs immediately after the NCR logo disappears. At that moment press
Ctrl-P.
and then arrow down to highlight the
[Enter]
BIOS SETUP UTILITY
PCIPnP
Boot
Security
[Disabled]
Options
Disabled
Enabled
to Save and Exit.
Chapter 5: Configuring AMT
Chipset Exit
Options
←
Select Screen
↑↓
Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
5-3
Enabled