Powering Up The Terminal; Terminal On/Off Switch; Power Button Override; Default Boot Order - NCR RealPOS 70XRT User Manual

Powering Up the Terminal

Terminal On/Off Switch

The Terminal On/Off Switch is located on the Front Base Cover. This is a logic switch only.

Power Button Override

When the Power Button is held for five seconds the system shuts down immediately. This
function can be disabled in the BIOS. In the Boot Menu set the Power Button Override
option to Disabled.
After power is applied to the terminal the Power-up self-tests run to verify basic functionality.
ROM-based setup should be used to configure network options. Full configuration depends
upon the system server and the management web site.

Default Boot Order

The factory-default boot order is LAN, CD-ROM, HDD. There is no flex disk drive option.
The CD / DVD drive tray is front-accessible. For security purposes, the drive can be removed
from the boot order and/or disabled entirely in the BIOS, which can be password protected.
An external USB CD-ROM has been certified for staging and maintenance. Other storage
devices such as external USB thumb drives may also be used, but none are currently certified,
released or supported. To request certification and support for third-party devices, submit your
request through the Third-Party Product website
Chapter 2: Installing the Terminal 2-13
Power Switch
(http://www.rsg.ncr.com/tpp/).
26238