Installing A Remote Crt Customer Display - NCR 7452 User Manual

Installing a Remote CRT Customer Display

A CRT Customer Display can be added to a system that has either a
5952 or 5953 DynaKey. The CRT Customer Display is a stand-alone
device (remote-mounted).
1. Place the display on the desired surface within 4 meters of the host
workstation.
2. Remove the Cable Cover by pressing down on the top edge of the
cover as shown below and pivoting the cover back.
Press tabs down,
pivot top of cover out
Chapter 3: Installing Optional Hardware Features 3-67
Cable Cover
VGA CRT
14676
14323