Rs-232 Installation W/Power From Powered Usb - NCR RealPOS 70XRT User Manual

RS-232 Installation w/Power from Powered USB

1. Connect the RS-232 Printer Interface Cable to the RS-232 Connector on the printer and to
2. Connect the Printer Power Cable to the Power Connector on the printer and to the 24 V
an RS-232 Connector on the terminal.
Powered USB Connector on the terminal.
A B
C
Line Out
D
C
RS232/ C
LAN
B
A
MIC RS232/ A
RS-232A/B (Set to Non-Powered)
9-Pin to 9-Pin (Black)
9-Pin to 9-Pin (Beige)
497-0430266 - 1.0 m
497-0408349 - 0.7 m
(1416-C879-0010)
(1416-C359-0007)
497-0430265 - 4 m
(1416-C879-0040)
Chapter 6: Installing Optional Remote Peripherals
F
D E
E F G Cash
RS232/ D
Drawer
RS232/ B
24V USB
9-Pin to 25-Pin (7162)
497-0407427 - 1.0 m
(1416-C337-0010)
497-0407429 - 4 m
(1416-C337-0040)
497-0407430 - 15.2 m
(1416-C337-0152)
6-3
Power RS-232
497-0441156 - 1m
(1432-C092-0010)
497-0441157 - 4 m
(1432-C092-0040)
26325