Raid Option Rom - NCR RealPOS 70XRT User Manual

7-8 Chapter 7: Installing a RAID System

RAID Option ROM

The Intel RAID Option ROM provides a pre-operating system user interface for configuring
Intel® RAID Technology. It is integrated with the system BIOS on the motherboard. The Intel
RAID option ROM is enabled when the Intel RAID Technology is enabled in the system BIOS
setup. The Option ROM is used to manage your RAID volumes. You can create, delete, or
reset them to a different status.
To enter the Option ROM manager press
information displayed.
The Option ROM menu is displayed, showing the current disk configuration. The example
below shows two disk system with a RAID1 (Mirror) volume installed.
RAID Volumes:
Id
0
Physical Disks:
Port
0
1
Intel(R) Matrix Storage Manager option ROM v6.1.0.1002 ICH8R wRAID5
Copyright(C) 2003-06 Intel Corporation. All rights Reserves.
1. Create RAID Volume
2. Delete RAID Volume
[ DISK/VOLUME INFORMATION
Name Level
Volume_0000 RAID1(Mirror)
Drive Model Serial #
ST980210AS 4LS4MDHX
ST980210AS 9LR0SN91
Volumes with "Rebuild" status will be rebuilt within the operating system.
[↑↓]-Select [ESC]-Exit
during boot when you see the Disk/Volume
CTRL-I
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Recovery Volume Options
5. Exit
]
Strip Size
N/A 74.56
Size
74.56GB
74.56GB
[ENTER]- Select Menu
Status Bootable
Normal Yes
Type/Status(Vol ID)
Member Disk(0)
Member Disk(0)