Chapter 3: Touch Screen Calibration; Installing And Calibrating The Touch Screen; Installing The Driver - NCR RealPOS 70XRT User Manual

3
Chapter 3:

Installing and Calibrating the Touch Screen

Installing the Driver

Touch Screen Calibration
Be sure to observe for the following Touch Screen calibration guidelines:
•
Calibrate the touch screen as part of the installation process.
•
Recalibrate the touch screen when the system is installed at its final location.
•
Recalibrate whenever the terminal is moved to a new location.
•
Recalibrate the touch screen anytime the system has been disassembled for servicing.
•
Download the Calibration software from the NCR website.
http://www.ncr.com
a. At this site, select Support.
b. Under Related Items, Services; select
→
Files Retail Platform Software
c. Download the Touch Driver (version 6.31b or later).
Note: If you have a previous version of another touch screen driver loaded on your system,
you must completely remove it, using the TSUN.EXE uninstaller from the latest driver package
in the \common directory, before continuing with this installation process.
1. Extract the Hampshire driver installation files into to a working directory on the host
terminal.
2. Locate and run the TSHARC USB
3. Welcome screen >
4. License Agreement screen > Accept,
Drivers and Patches
→ 7403.
Setup.exe
Next
Next
→
Retail Support
program.