Chapter 6: Installing Optional Remote Peripherals; Introduction; Cable Routing; Installing A Transaction Printer - NCR RealPOS 70XRT User Manual

6
Chapter 6:

Introduction

Cable Routing

Installing a Transaction Printer

Installing Optional Remote Peripherals
This chapter discusses how to install optional remote peripheral devices.
Peripheral cables connect to the I/O Panel behind the Base Front Cover or to the Backplane
Board. See the Connecting the External Cables section in the Installing the Terminal chapter
for instructions how to access the connectors and how to route the cables.
Note: This section discusses how to connect a remote printer. The printers can also be
integrated with the 7403 terminal using the Integration Trays. See the GMS Integration Tray
(7403-K300) or Hospitality Integration Tray (7403-K301) Kit Installations for more
information.
The printers can connect through a USB connector or an RS-232 connector. It receives power
through a Powered USB power cable.