Chapter 14: Bios Settings; Entering Setup; How To Select Menu Options; Restoring Factory Settings - NCR RealPOS 70XRT User Manual

14
Chapter 14:

Entering Setup

How to Select Menu Options

Restoring Factory Settings

BIOS Settings
1. Connect an alphanumeric USB keyboard to the terminal.
2. Apply power to the terminal.
3. When you see the NCR logo displayed press [Del].
The following keyboard controls are used to select the various menu options and to make
changes to their values.
•
Use the arrow keys to select (highlight) options and menu screens.
•
Use the key to select a submenu.
[Enter]
•
Use the and keys to change field values.
[+] [-]
•
To view help information on the possible selections for the highlighted item, press [F1].
•
To save the changes, move the cursor to the Exit Menu, select either Save Changes &
Exit or Save Changes, and press [Enter].
To reset all values to their default settings for the current screen, press [F9]. The terminal
automatically loads the BIOS default values. To reset all BIOS settings to their default settings
go to the Exit menu, press F9, select either Save Changes & Exit or Save Changes, and press
[Enter].
See the BIOS Default Settings sections later in this chapter for the pre-installed Setup defaults.