11
Chapter 11:
Cabinet and Touch Screen Cleaning Procedures
Cleaners/Solvents to Use
Cleaners/Solvents to NOT Use
Maintenance
1. Disconnect the unit from the power outlet before cleaning.
2. Use a soft cloth dampened lightly with a mild non-abrasive soap & water solution or 70%
Isopropyl Alcohol.
3. Gently wipe the subject area clean.
4. Wipe the damp areas dry. Make sure the glass and touch screen edges are completely dry
before using the unit.
5. Avoid getting any liquids inside the unit. If liquid does get inside, have a qualified service
technician check it before you power it on again.
6. Remove (vacuum) extra dust from around the cooling vents (See Cooling Vent Cleaning
section).
Use the following cleaner/solvents to clean the unit.
•
Mild Non-Abrasive Soap and Water Solution
or
•
70% Isopropyl Alcohol
Do NOT use any of the following to clean the unit. They can damage the unit.
•
Methyl Alcohol
•
Degreasers
•
Ethyl Alcohol
•
Ammonia-based Cleaners such as glass cleaners (Windex)
•
Abrasive Cleaners
•
Vinegar Cleaners
•
Any Strong Dissolvent
•
Thinner
•
Benzene
•
Compressed Air.
•
Solvents
•
Bleach