Character Sets - NCR RealPOS 70XRT User Manual

1-16 Chapter 1: Overview
•
•
•
•
•
•
•

Character Sets

•
•
•
PCB
• Microcontroller
• EIA 232 Interface support
• USB 2.0 Interface support
Cabinet
• UV Stable Material
• Available in NCR Light Gray (G-11) and NCR Charcoal Gray (CG1)
Connectors
• 9 pin D sub
• Powered USB
Cables
• Powered EIA-232
• Powered USB Cable
• Unpowered EIA-232 Cable with Y-Connection for Power Brick
• Unpowered USB Cable with Y-Connection for Power Brick
• 1m and 4m Lengths
Power Supply
• Universal Power Supply (12V, 12W output)
• 8 pin Molex Connector
EIA-232 or USB 2.0 I/F support
• The components for both interfaces are populated on a single printed circuit board.
Both interfaces are active, though only one interface can be physically connected at a
time. The display communicates via the interface connected to it.
Mounting Options
• Table Mount, 4-in. Post
• Table Mount, 8-in. Post
• Table Mount, 12-in. Post
• Table Mount, 16-in. Post
• Integrated Mount for NCR 7456, 7459, 7458
Support for 19 character sets
3 Character sets in base unit
• Code Page 858 (International)
• Katakana
• Code Page 866 (Cyrillic)
32 KB Flash Memory for support of up to 16 additional character sets