NCR RealPOS 70XRT User Manual page 105

11. Select the correct Member drive from the list of available drives and move it to the right
side window using the arrow button. Select Next.
12. RAID 0 Only: Specify the amount of available space to be used by the new RAID
volume. You can use the slider to do this, or you enter a percentage of disk space or the
size in GB in the fields.
Note: The minimum required size for the RAID volume is determined by the size of the
source hard drive. If you create a volume that uses less than 100% of the hard drive space,
you may create a second RAID volume to use the remaining space.
Chapter 7: Installing a RAID System 7-5