Chapter 6: Installing Optional Remote Peripherals; Introduction; Cable Routing; Installing A Transaction Printer - NCR RealPOS 70XRT User Manual

6
Chapter 6:

Introduction

Cable Routing

Installing a Transaction Printer

Installing Optional Remote Peripherals
This chapter discusses how to install optional remote peripheral devices.
Peripheral cables connect to the I/O Panel behind the Base Front Cover or to the
Backplane Board. See the Connecting the External Cables section in the Installing the
Terminal chapter for instructions how to access the connectors and how to route the
cables.
Note: This section discusses how to connect a remote printer. The printers can also
be integrated with the 7403 terminal using the Integration Trays. See the GMS
Integration Tray (7403‐K300) or Hospitality Integration Tray (7403‐K301) Kit Installations
for more information.
The printers can connect through a USB connector or an RS‐232 connector. It receives
power through a Powered USB power cable.