Installing An Option Board - NCR 3125 User Manual

Installing Options

Installing an Option Board

6.6
Installing an Option Board
A Fax/Data modem board and a flexible disk
controller board are available as option boards.
Perform the following steps to install an option board
to the system.
1 Remove the cover from the option board slot.
Keep the flap to cover the option board slot if you
remove the option board later.
2 With the component side of the option board
facing up and the connector pointing into the
computer, insert the option board into the option
board slot.
3 Push the option board in until it is securely
plugged into the option board receptacle of the
system.
4 If you have installed a modem, connect the
modem to a telephone line. Use a country-specific
modem cable or an adapter plug.
5 Tb operate the option board successfully you must
load appropriate driver software to the system.
System 3125 User's Manual