Timecode Source Page; Earpiece Source Page (Requires Ifb Audio Option) (Zfr100 Only); Zaxcom Miniature Digital Recorder User's Manual; Format Recording Card Page - Zaxcom ZFR100 User Manual

Zaxcom Miniature Digital Recorder User's Manual____________________________________Chapter 2

Timecode Source page

TC SOURCE:
IFB (RF)
Page purpose:
Parameters:
SIDE CONNECTOR
IFB (RF)
AUDIO INPUT
Earpiece Source page
IFB EARPIECE:
IFB RX AUDIO
Page purpose:
Parameters:
IFB MIX REMOTE
IFB MIX ALL
IFB RX AUDIO
REC/PLAY

Format Recording Card page

PRESS UP KEY 5X
TO ERASE CARD
SUCCESS (REBOOT)
#### MBYTES
FORMAT FAILED
ERROR ##
Page purpose:
erase the contents) in the recorder.
NOTE: To display this page it is necessary to have the card INSTALLED in the media slot PRIOR to booting
up the unit.

To Format a Card:

1. Before formatting the card, enter the name
2. With the power „OFF‟, insert the memory card into the media slot with the label to the back of the unit. Press
it all the way in; it will lock down.
3. Repeatedly press the MENU key until the screen displays
4. Press the INC key 5 times. (displays
5. Sometime later displays
6. And finally displays
indicates the space on the card available for recording and
Be sure the recorder displayed
This page maintains which input to use as the timecode source.
– Accept a timecode source connected to the attached STAxxx‟s side connector.
– Accept a timecode source connected to the IFB100.
– Accept a timecode source connected to the Audio Input connector.
(requires IFB Audio Option) (ZFR100 ONLY)
This page establishes the source for the audio being monitored during operation.
– the earpiece mix is controlled from the connected Mix-8 w/IFB100.
– the earpiece receives its audio from both the media and the IFB receiver.
– the earpiece receives its audio from the IFB receiver.
– the earpiece receives its audio from the media.
This page erases and formats a media card. This must be done before the card can be used (or to
FORMATTING FAT32
ERASING SEGMENTS
SUCCESS #### MBYTES
Error Code
- 1
- 2
- 3

Table 2-10 Format Error Codes

SUCCESS #### MBYTES
(Track Name page {p.32}) to be used for this card.
PRESS UP KEY 5X TO ERASE CARD
)
.
FORMAT FAILED ERROR ##
or
##
is one of the following error codes:
Description
No SD card found
No FAT32 format found
Invalid SD card sector size
before using it to record.
23
.
####
, where