Zaxcom ZFR100 User Manual page 63

Zaxcom Miniature Digital Recorder User's Manual____________________________________Chapter 9
xxii. RECORD MODE: ________
([LOOP RECORD] / [NON-LOOP RECORD])
xxiii. SIDE TONE GAIN: ________
([0dB] / [+6dB] / [+9dB]/ [+12dB])
xxiv. ALLOW IFB REMOTE CONTROL: ________
([OFF] / [ON])
xxv. IFB JAM THRESH: ________
(valid range: 10 to 1000 to 3000 MS, value step: 1)
xxvi. NAME: ______________________
(max: 8 chars, char = 0 to 9, space, A to Z)
xxvii. ID1: ________ ID0: ________
(valid range: 000 to FFF, value step: 1, unless necessary, use 000)
RECORDING TO THE CARD
i. Format the card:
1) With the power 'OFF', insert the card into the slot.
2) Hold the MENU key while powering up.
3) Once up, release the MENU key.
4) Press the MENU key repeatedly until PRESS UP KEY 5X appears.
5) Press the INC key 5 times to erase and format the card.
6) The display indicates its progress.
7) Wait for successful completion before using. If it fails, do not use it to record.
ii. Record to the card:
1) Turn 'OFF' the unit.
2) Insert the card.
3) Turn 'ON' the unit.
4) Press the REC key.
INSTALLING A NEW OPERATING SYSTEM
i. Copy the program to a card.
ii. Insert the card into the media slot.
iii. Simultaneously press the INC & DEC keys while powering up the unit.
iv. Unit displays BurningROM. Process takes 20 seconds.
v. Once DONE is displayed, cycle the power to run on the new version.
SAFE BOOT MODE
Simultaneously press the MENU and DEC keys while powering up.
(Recording Mode page
(Side Tone Gain page
(Allow IFB Remote Control page
(IFB Jam Threshold page
(Track Name page
(Encryption Code page
63
{p.31})
{p.32})
{p.32})
{p.32})
{p.33})
{p.32})