Zaxcom ZFR100 User Manual page 53

Zaxcom Miniature Digital Recorder User's Manual____________________________________Chapter 8
Fixed TXPWRCAL menu so values can‟t go negative
===================================================================================================================
Version 6.14D: 2009-09-15
Added RS232 support thru TC input pin for MIX8->IFB
===================================================================================================================
Version 6.14C: 2009-09-15
Changed don‟t force UNKNOWN_MODE forever either (IFB) in TransmitIFBblock()
===================================================================================================================
Version 6.14B: 2009-09-14
Changed when Chase command comes in take unit out of record mode immediately
Changed unit goes back to UNKNOWN_MODE now 1.5s after a ZaxNet tpmode command
===================================================================================================================
Version 6.14A: 2009-09-11
just a rebuild after CPP test - few non-functional changes
===================================================================================================================
Version 6.13R: 2009-08-18
Changed moved RecordHandler to before SCRAMBLE routine in audioIO.c to fix scrambling of recorded audio
===================================================================================================================
Version 6.13Q: 2009-08-18
Fixed sturct *aud not being initialized in chase
===================================================================================================================
Version 6.13P: 2009-08-18
Changed IFBTC jam to twiddle SPM a little better - should converge in 50 seconds
Fixed chase TCoffset overflow problems
===================================================================================================================
Version 6.13N: 2009-08-18
Changed if CHASE_CMD then IFB100 sets TXifb.NS_RemoteTPmode=UNKNOWN_MODE to allow chase to happen on TRX
===================================================================================================================
Version 6.13M: 2009-08-18
Changed cleaned out clenmes so we should be back to normal except DBITS no longer controls packet timing thing
===================================================================================================================
Version 6.13L: 2009-08-18
Changed undid most of the experimental stuff in trans2gig.c
DBITS controls SOP THRESHOLD (was set to 2)
cneanme in screens.c and init 2gig
===================================================================================================================
Version 6.13K: 2009-08-18
Changed forcing one antenna
===================================================================================================================
Version 6.13J: 2009-08-18
Added IFB100 – test to ignore CRC errors (trans2Gig.c see cleanme)
===================================================================================================================
Version 6.13I: 2009-08-18
Changed more chase stuff
===================================================================================================================
Version 6.13H: 2009-08-10
Changed group code handling to make chase work
Changed group code in UBcmds from Deva is now replaced with IFB's group code setting
===================================================================================================================
Version 6.13D: 2009-08-03
Changed FindTimecodeInDir seems to work
===================================================================================================================
Version 6.13C: 2009-05-28
Added IFB100 – automatic UNKNOWN TP mode change
===================================================================================================================
Version 6.13B: 2009-07-13
Changed two down key presses in Pacifier page now reverts to UNKNOWN transport mode (like when the unit boots)
===================================================================================================================
Version 6.13A: 2009-07-12
Changed starting remote chase mode
===================================================================================================================
Version 6.12M: 2009-05-28
53