Chapter 4 - Zfr100 Adapters; Sta100 Stereo Adapter; Installation; Adjusting The Input Level - Zaxcom ZFR100 User Manual

Zaxcom Digital Wireless System User's Manual_______________________________________Chapter 4

STA100 Stereo Adapter

The STA100 allows the unit to record in stereo from a Line-level source.

Installation

The STAxxx attaches to the ZFR100 with two screws.
Tighten the two screws, alternating between them, until the adapter and recorder are tightly connected.
CAUTION: Do not over-tighten the screws.
Connect a Line-level source to the TA-5M connector. The Line-level input needs to be between -6 and +8 dBu.

Adjusting the Input Level

Output tone from a mixer and adjust the 2 input pots so the meter on the LCD screen is at a level of -20 dBFS.
The stereo adapter does not have a limiter function so it is important not to overdrive or clip the input of the
stereo adapter.
Chapter 4 – ZFR100 Adapters
1. Power Connector
2. Timecode Input Connector
3. Screws to Attach to ZFR100
4. Electrical Contacts for ZFR100
5. Audio/Timecode Output Connector
Figure 4-1 STA100 Front & Back Views
1.
2.
3.
4.
5.
6.
7.
8.
9.
6. Output Level Adjustment
7. TA-5M Audio Input Connector
8. Level Trim for Channel #2 (right)
9. Level Trim for Channel #1 (left)
37