Managing Your Server - Sun Oracle Fire X4170 M2 Installation Manual

Servers Environmental Requirements
TABLE 1-6
Parameter
Operating temperature
(single, non-rack system)
Non-operating temperature
(single, non-rack system)
Operating humidity
(single, non-rack system)
Non-operating humidity
(single, non-rack system)
Altitude (operating)
(single, non-rack system)
Altitude (non-operating)
(single, non-rack system)

Managing Your Server

After you have installed your server, you have several different options for
managing it depending on your situation.
Managing a single server
■
Your server can be managed with a wide variety of system management tools. For
more information on the single system management tools, see the information at
http://www.sun.com/systemmanagement/managementtools.jsphttp://
www.oracle.com/goto/system-management
Oracle Hardware Installation Assistant is an application that you can use for
■
initial server configuration. This application helps you to update firmware
(ILOM firmware, BIOS, and RAID controller software) and to automate
installation of a Linux or Windows operating system. For more details, see the
Oracle Hardware Installation 2.5 User's Guide for x86 Servers at:
http://www.oracle.com/pls/topic/lookup?ctx=hia
Chapter 1
Value
° ° °
5 C to 35 C (41 F to 95
° ° °
-40 C to 70 C (-40
10% to 90% relative humidity, non-condensing
Up to 93% relative humidity, non-condensing
• For the Sun Fire X4170 M2 Server: Up to 3000 m, maximum
ambient temperature is derated by 1 degree C per 300 m
above 900 m
• For the Sun Fire X4270 M2 Server: Up to 3048 m, maximum
ambient temperature is derated by 1 degree C per 300 m
above 900 m
Up to 12,000 m
Preparing to Install the Sun Fire X4170 M2 and X4270 M2 Servers
°
F)
F to 158° F)
15