Table of Contents
Advertisement
Sun Fire X4170 M2 and X4270 M2 Servers Installation Guide for Linux, Virtual
■
Machine Software, and Oracle Solaris Operating Systems, which is available at:
http://www.oracle.com/pls/topic/lookup?ctx=E19762-01
http://www.oracle.com/pls/topic/lookup?ctx=E19245-01
Configuring the Preinstalled Oracle
Solaris 10 Operating System
After you have completed the configuration worksheet, use the following procedure
to configure the preinstalled Oracle Solaris software.
▼ Configure Oracle Solaris 10 OS
1. If you are not already logged in to Oracle ILOM, log in either locally from a
serial connection, or remotely from an Ethernet connection.
See
"Log In to Oracle ILOM Using a Serial Connection" on page 50
Oracle ILOM Using an Ethernet Connection" on page
2. If main power has not yet been applied to the server, apply main power.
See
"Apply Main Power to the Server" on page
3. From the Oracle ILOM prompt, type the following command and answer the
prompt:
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started.
The GRUB menu appears.
From the GRUB menu (
to direct the display to the serial port, or whether you want to direct the display
to a device connected to the video port.
), you can choose whether you want to continue
FIGURE 6-1
Chapter 6
Configuring the Preinstalled Solaris 10 Operating System
or
51.
57.
"Log In to
67
Advertisement
Table of Contents
Need help?
Do you have a question about the Fire X4170 M2 and is the answer not in the manual?