Log In To Oracle Ilom Using An Ethernet Connection - Sun Oracle Fire X4170 M2 Installation Manual

3. Press Enter to establish a connection between your serial console and Oracle
ILOM.
A login prompt to Oracle ILOM appears.
4. Log in to the Oracle ILOM command-line interface (CLI) using an
Administrator account.
Oracle ILOM displays a default command prompt (->), indicating that you have
successfully logged in to Oracle ILOM.
▼ Log In to Oracle ILOM Using an Ethernet
Connection
This procedure requires that you have an Oracle ILOM Administrator account and
that you know the IP address or hostname of the server SP.
Note – The default Oracle ILOM Administrator account shipped with the server is
root and its password is changeme. If this default Administrator account has since
been changed, contact your system administrator for an Oracle ILOM user account
with Administrator privileges.
1. Using a secure shell (SSH) session, log in to Oracle ILOM by specifying your
Administrator account user name and the IP address of the server SP.
For example:
ssh -1 username host
or
ssh username@host
Where host is either the IP address of the server SP or a hostname (when using
DNS).
The Oracle ILOM password prompt appears.
2. Type a password for the Administrator account.
For example:
ssh root@192.168.25.25
root@192.168.25.25's password: changeme
Oracle ILOM displays a default command prompt (->), indicating that you have
successfully logged in to Oracle ILOM.
Chapter 4 Connecting to Oracle ILOM and Applying Main Power to the Server 51