Table of Contents
Advertisement
3.11.2 HDD TEMP
In HDD TEMP, we define:
alarms are NONE = not activated, 1 = output signal 1 transmitted, 2 = output signal 2
transmitted, 3 = output signal 3 transmitted and 4 = output signal 4 transmitted. To
change this, simply use the Jog Dial on the DVR to make your selection.
BUZZER: HDD TEMPERATURE buzzer.
ENABLE: To enable a buzzer when HDD's temperature is higher than the
temperature set in "SET TEMPERATURE".
DISABLE: To disable HDD TEMP. Buzzer.
ALARM OUTPUT: This will transmit a signal to another device. The setting of
ALARM DURATION: Permanent
NETWORK ALARM:
YES: To enable network alarm.
NO: To disable network alarm.
SEND EMAIL:
Diagram 3.21
57
Advertisement
Table of Contents
