Ness PowerPlex EDR400 Instruction Manual page 13

Printer (USB port)
Connect the printer to the USB port connector at system startup. The
system can support 2 types of printer: HP Photo Smart P1000 and EPSON
Stylus Color 980.
Microphone/Speaker
Connect the microphone/speaker or other audio devices to the Audio
In/Audio out connector.
PTZ Camera
Connect the PTZ camera to the RS-232 #2 connector. The system
can supports Pelco C1487M type camera.
Ethernet
e
DR400 is enabled control from the PC via Ethernet. Connect the
LAN connector to a standard RJ45 connector Ethernet cable. Shown
in below is an example of connection.
Modem
e
DR400 is enabled control from the PC via modem. Connect the
RS 232 connector to a modem. Shown in below is an example of
connection.
Administrator's Guide and Operating Instructions
9