Connecting The Remote Pc And Server; Remote View - Ness PowerPlex EDR400 Instruction Manual

Through Local Network, Intranet, Internet or dial-in functions, users are able
to view the live video, image playback, upload/download the configuration
file and upgrade the software of
remote computer does not need to have the
hardware and software installed.

Connecting the Remote PC and Server

Before you start, please verify the connection between
modem or network. The procedure for configuring a remote PC depends
on the desired type of connection. The user can either dial directly into the
server through modem, or connect over a network. You must obtain IP
addresses for the remote PC and
System Configurations for the details.

Remote View

After the Remote PC and
and enter the system IP address in the Location/Address field. (Note.1)
Example:
http://61.218.36.252
The main page will be shown on the screen, enter the appropriate Login
name and password, then click on the Submit button. (Note. 2)
The main control page will be shown as below.
The video image can be displayed in full or quad screen mode, and the
time shown on each window refers to the time on
The following is the brief description of each item above.
Administrator's Guide and Operating Instructions
e
DR400 from any PC in anywhere. The
e
DR400 software or any special
e
DR400, please refer to Chapter 6.15
e
DR400 are connected, start your Web browser
53
e
DR400 and the
e
DR400 system clock.