Ness PowerPlex EDR400 Instruction Manual page 25

4 channel digital video recorder
Table of Contents

Advertisement

Administrator's Guide and Operating Instructions
Focus Camera – To define the camera that will respond to this Alarm
Action. The default settings are Camera 1 for Alarm Action 1,
Camera 2 for Alarm Action 2, and so on.
Go to Preset- The option will be available while the focus camera is a
PTZ camera. Check the box and enter the desired preset location. The
corresponding PTZ camera will automatically go to the preset
location while the alarm action is triggered. For more details of the
preset location settings, please refer to Chapter 7 PTZ Control
Functions.
Pre-record – Pre-record time to define how long (in seconds) before
the Alarm Action is triggered the Focus Camera shall be intensively
recorded (Note 2). Use the Up/Down arrow buttons to adjust the
value (0-5 seconds).
Post-record - Post-record time to define how long after the Alarm
Action is triggered the Focus Camera shall be recorded at Alarm
Recording Rate. However, the Post-record time will be prolonged if
there is another Alarm Action triggered during the post-record
duration from the previous action. Please refer to Camera Setup for
Alarm Recording Rate of Camera. Use the Up/Down arrow buttons
to adjust the value (0 seconds-60minutes).
Enable – Check to enable the Alarm Output when the Alarm Action is
triggered.
Alarm Out – To define which Alarm Output will be triggered when
the Alarm Action is triggered. NC and NO signals are available,
please refer to Alarm Out Setup. Click on the Down arrow button to
select one of the Alarm Outputs (AO 1-4).
Output – Alarm Out output state when the Alarm Action is triggered.
For NC signal, it's always open, for NO signal close. The Normal
State above shows whether the selected Alarm Out is NC signal or
NO signal.
Buzzer On – To activate the internal buzzer or not when the Alarm
Action is triggered.
Log – Log to event log list or not. Please refer to Log Display for
the details.
Show Message – To display the alarm message or not when the
Alarm Action is triggered.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents