Ness PowerPlex EDR400 Instruction Manual page 46

Printer Model – Select the proper printer model which connected to
the system. The system now provides 2 printer drivers, EPSON
Stylus Color 980 and HP Photo Smart P1000.
Software Upgrade – Click on the button, the system will
automatically detect and show the message to inform the user if
there's a later version software available for downloading. To
upgrade the software, just click on Yes to confirm the downloading.
The system will automatically reboot and upgrade while the
downloading is completed. As the processes have to be done over
internet, please make sure that the system is well connected to the
internet and the communication setting is correct.
Factory Setting – Click on the button to revert all the configuration
setting to default value.
Daylight Saving Time –
Check the Enable box to enable Daylight Saving Time.
The system provides 2 versions of Daylight Saving Time as described in
below; select the proper one while the Daylight Saving Time function is
enabled.
North America – Clocks are turned forward an hour begins at
2 a.m. on the first Sunday in April, time reverts to standard
time at 2 a.m. on the last Sunday in
October.
European Union – Clocks are turned forward an hour begins at
1 a.m. on the last Sunday in March, time reverts
to standard time at 1 a.m. on the last Sunday in
October.
TV System – NTSC or PAL, select the proper system by checking
the box in front. Basically, the system can detect it automatically,
doesn't require user to define it. However, the system might
sometimes misjudge due to the ambiguous signal, which mainly
caused be over-length or bad quality cable. In this case, the user can
define it manually to meet the local system.
Administrator's Guide and Operating Instructions
42